Drawing Robot In A Box

Posted on by
Draw on the go with a small Arduino-powered CNC robot!

Draw on the go with a small Arduino-powered CNC robot!

Well, technically, ON a box.

The wiring is really simple.  A small breadboard is used connect Arduino pins 10, 11, 12, power and ground to the three servos.  The keypad is wired directly to pins 2 – 8 on the Arduino.  That’s it.

Wait... that's all there is to it?!?

Wait… that’s all there is to it?!?

Of course, it doesn’t work.  Yet.  🙂

Tiny CNC Drawing Robot
  1. An Itty Bitty Drawing Robot
  2. Tiny CNC Drawing Robot - Cost Estimate
  3. How to Build a Tiny CNC Drawing Robot
  4. Better video of Tiny CNC Drawing Robot actually drawing
  5. Design considerations with the Tiny CNC
  6. Tiny CNC - An Experiment in Commerce
  7. How to Wire a Tiny CNC
  8. Tiny CNC - now a 3 Axis CNC!
  9. Tiny CNC Software Update
  10. How to Build a Tiny 3-Axis CNC Drawing Robot
  11. Tiny 3-Axis CNC Drawing Robot - Software Update and Design version 0.29 postmortem
  12. Nine Drawing Robots On the Loose!
  13. Competing Design Ideals in a Drawing Robot
  14. The Tiniest Drawing Robot Actually Draws!
  15. Robot Friends: Tiny CNC and the WaterColorBot
  16. Tiny Drawing Robot Gallery
  17. TinyCNC Drawing Robot Software User Guide
  18. Drawing Robot AFRON 2013 Design Challenge Entry
  19. TinyCNC Two steps forward, one step back!
  20. Drawing Robot In A Box
  21. Drawing By Numbers
  22. TinyCNC: Too Many Ideas
  23. TinyCNC - Working Keypad UI
  24. Don't let SkyNet win! Take this poll!
  25. Care and Feeding of Your TinyCNC Drawing Robot
  26. Maker Faire 2016 Drawing Robot Presentation Slides
← Previous Next →

One thought on “Drawing Robot In A Box”

Comments are closed.