Skip to primary content
Skip to secondary content

PlotterBot

Learn how to build a drawing robot

PlotterBot

Main menu

  • Home
  • Robots
    • Tiny CNC
      • Challenges Entered
        • Drawing Robot AFRON 2013 Design Challenge Entry
          • TinyCNC Drawing Robot Software User Guide
    • PlotterBot
      • Introduction
      • Background
      • PlotterBot Prior Art
  • Drawing Robot Kit
  • About
    • Contact
    • Press

Tag Archives: links

Care and Feeding of Your TinyCNC Drawing Robot

Posted on May 21, 2016 by MakerBlock
Draw on the go with a small Arduino-powered CNC robot!

I’m bringing this fully assembled robot to Maker Faire on Sunday!

During my presentation at Maker Faire on Sunday I’ll be showing people how to build their very own TinyCNC drawing robot.  However, some things are best done in a written form – so you can refer back to the instructions while you work.

  1. Print these parts on a well-calibrated 3D printer
  2. Use the 8 plastic printed parts, 3 servo motors, and one zip tie to assemble the robot
  3. Wire the robot to your favorite microcontroller
  4. Program your microcontroller to make your robot do nifty things

”Tiny
  1. Design considerations with the Tiny CNC
  2. Tiny CNC - An Experiment in Commerce
  3. Tiny CNC Software Update
  4. Nine Drawing Robots On the Loose!
  5. The Tiniest Drawing Robot Actually Draws!
  6. Tiny Drawing Robot Gallery
  7. Care and Feeding of Your TinyCNC Drawing Robot
← Previous

Posted in Maker Faire, Tiny CNC | Tagged diagrams, drawing robot, instructions, links, tinycnc

Drawing Robot Newsletter

No spam. Just drawing robots.

Robots can't draw without your help

I'm on Mastodon

Proudly powered by WordPress
 

Loading Comments...