Care and Feeding of Your TinyCNC Drawing Robot

Posted on by
Draw on the go with a small Arduino-powered CNC robot!

I’m bringing this fully assembled robot to Maker Faire on Sunday!

During my presentation at Maker Faire on Sunday I’ll be showing people how to build their very own TinyCNC drawing robot.  However, some things are best done in a written form – so you can refer back to the instructions while you work.

  1. Print these parts on a well-calibrated 3D printer
  2. Use the 8 plastic printed parts, 3 servo motors, and one zip tie to assemble the robot
  3. Wire the robot to your favorite microcontroller
  4. Program your microcontroller to make your robot do nifty things
Tiny CNC Drawing Robot
  1. An Itty Bitty Drawing Robot
  2. Tiny CNC Drawing Robot - Cost Estimate
  3. How to Build a Tiny CNC Drawing Robot
  4. Better video of Tiny CNC Drawing Robot actually drawing
  5. Design considerations with the Tiny CNC
  6. Uses for a Tiny CNC Robot
  7. Tiny CNC - An Experiment in Commerce
  8. Tiny CNC - Going to 100
  9. Tiny CNC - now a 3 Axis CNC!
  10. Tiny CNC Software Update
  11. How to Build a Tiny 3-Axis CNC Drawing Robot
  12. Nine Drawing Robots On the Loose!
  13. Competing Design Ideals in a Drawing Robot
  14. Tiny Drawing Robot Updates, Incremental Progress, and More!
  15. The Tiniest Drawing Robot Actually Draws!
  16. Robot Friends: Tiny CNC and the WaterColorBot
  17. Tiny Drawing Robot Gallery
  18. TinyCNC Drawing Robot Software User Guide
  19. Drawing Robot AFRON 2013 Design Challenge Entry
  20. Drawing By Numbers
  21. TinyCNC: Too Many Ideas
  22. TinyCNC - Working Keypad UI
  23. Don't let SkyNet win! Take this poll!
  24. Care and Feeding of Your TinyCNC Drawing Robot
  25. Maker Faire 2016 Drawing Robot Presentation Slides
← Previous Next →